Aug 2025
Fastener Material Specifications
| Bolt Specifications |
| ASTM A193 | High-strength alloy and stainless steel bolts designed for elevated temperature or pressure, as well as demanding industrial conditions. |
| ASTM A307 | General-purpose carbon steel bolts, studs, and threaded rods with a minimum tensile strength of 60,000 PSI. |
| ASTM A320 | Bolts and studs made from alloy or stainless steel, specifically engineered for use in low-temperature environments. |
| ASTM A325 | Structural-grade steel bolts, heat-treated for durability, delivering tensile strength between 105 and 120 ksi. |
| ASTM A354 | Quenched and tempered alloy bolts, studs, and fasteners built for critical applications requiring high performance. |
| ASTM A449 | Medium-strength steel bolts and studs, quenched and tempered, suitable for a variety of general construction uses. |
| ASTM A490 | Alloy steel structural bolts, heat-treated to achieve a minimum tensile strength of 150 ksi. |
| ASTM F593 | Stainless steel hex bolts, screws, and studs for corrosion-resistant fastening solutions. |
| ASTM F1554 | Anchor bolts intended for securing structural supports to concrete foundations. |
| ASTM F3125 | Unified structural bolt specification combining A325, A490, and related standards into one streamlined requirement. |
| Washer Specifications |
| ASTM F844 | Unhardened plain steel washers for general-purpose fastening applications. |
| ASTM F436 | Hardened steel washers available in inch and metric sizes for structural and heavy-duty uses. |
| ASTM F959 | Compressible washer-type direct tension indicators, suitable for both inch and metric structural bolts. |
| Nut Specifications |
| ASTM A194 | Carbon and alloy steel nuts designed for high-pressure bolts and use in elevated temperature service. |
| ASTM A563 | Specifications for standard carbon and alloy steel nuts used in general fastener applications. |
| ASTM A594 | Specifications for corrosion-resistant stainless steel nuts. |
| Plating Specification |
Description |
| ASTM A153 | Zinc coating (hot dip) on hardware made from iron and steel. |
| ASTM AB695 | Zinc coatings mechanically applied to iron and steel components. |
| ASTM F1941 | Electrodeposited zinc plating for threaded fasteners. |
| ASTM F2329 | Zinc coating and hot dip treatment for special threaded fasteners including bolts, screws, washers, and nuts. |
| Rebar Specification |
Description |
| ASTM A615 | Deformed and plain carbon steel bars used for concrete reinforcement. |
| ASTM A706 | Deformed and plain low-alloy steel bars with improved weldability for reinforced concrete applications. |