| All-metal prevailing torque type hexagon nuts |
980 |
7042 |
27042 |
|
7042 |
1998-02 |
Metal lock nuts, style 2 – Grades 5–12 |
Nut height and width revised to ISO 272 |
| All-metal prevailing torque type hexagon nuts |
980 |
10513 |
30513 |
|
10513 |
1998-02 |
Metal lock nuts, style 2, fine thread – Grades 8–12 |
Dimensions updated per ISO 272 |
| Countersunk (flat) head tapping screws with cross recess |
7982 |
|
|
7050 |
7050 |
1990-08 |
| Cross-recessed countersunk screws |
|
Head and countersink geometry changed |
| Drilling screws with tapping screw thread – Mechanical and functional properties |
7504 |
10666 |
|
|
10666 |
2000-02 |
Drilling screws – Mechanical/functional specs |
Split into EN ISO 10666, 15480–15483; some types removed |
| Hexagon Bolts without Hexagon Nut – with Hexagon Nut, Type g |
601 |
4016 |
24016 |
4016 |
4016 |
2001-03 |
Hex bolts – Grade C |
Range and sizes updated to ISO 272 |
| Hexagon bolts, Metric fine thread, Types m and mg |
960 |
8765 |
28765 |
8765 |
8765 |
2001-03 |
Hex thin nuts, fine thread – Grades A/B |
Range extended; width per ISO 272 |
| Hexagon flange bolts |
6921 |
|
1665 |
|
8102 |
1998-11 |
Flange bolts, heavy series |
Some sizes changed; 12.9 class removed |
| Hexagon head bolts with shank; M 1,6 to M 39 screw threads, Product grades A and B |
931-1 |
4014 |
24014 |
4014 |
4014 |
2001-03 |
Hex bolts – Grades A/B |
Range extended; ISO 272 sizes included |
| Hexagon head screws – Product grades A and B |
933 |
4017 |
24017 |
4017 |
4017 |
2001-03 |
Hex screws – Grades A/B |
Nominal range extended; ISO 272 sizes |
| Hexagon nuts with flange |
6923 |
|
1661 |
|
4161 |
1998-02 |
Flange nuts |
Fine threads removed; M10 width changed |
| Hexagon nuts; Metric Thread, Type g |
555 |
4034 |
24034 |
4034 |
4034 |
2001-03 |
Hexagon nuts – Product grade C |
Width across flats according to DIN ISO 272 included; nominal diameter reduced |
| Hexagon nuts; Metric screw threads; Product grades A and B |
934 |
4032 |
24032 |
4032 |
4032 |
2001-03 |
Hexagon nuts, style 1 – Product grades A and B |
Nominal diameter changed, height of the nut changed partially; nuts with fine thread specified in DIN EN ISO 8673; width across flats according to DIN ISO 272 included |
| Hexagon nuts; Metric screw threads; Product grades A and B |
934 |
8673 |
28673 |
|
8673 |
2001-03 |
Hexagon nuts, style 1, with metric fine pitch thread – Product grades A and B |
Nominal diameter changed, height of the nut changed partially; nuts with regular type screw thread specified in DIN EN ISO 4032; width across flats according to DIN ISO 272 included |
| Hexagon screws, Thread Approximately to Head, Metric Thread, Type g |
558 |
4018 |
24018 |
4018 |
4018 |
2001-03 |
Hexagon head screws – Product grade C |
Nominal size extended; width across flats according to DIN ISO 272 included |
| Hexagon socket countersunk head screws |
7991 |
10642 |
|
|
10462 |
2004-06 |
Hexagon socket countersunk head screws |
|
| Hexagon socket head cap screws |
912 |
4762 |
|
|
4762 |
2004-06 |
Hexagon socket head cap screws |
Nominal size range changed; fine thread deleted (ISO 21269) |
| Hexagon socket set screws with cone point |
914 |
4027 |
|
|
4027 |
2004-05 |
Hexagon socket set screws with cone point |
Nominal sizes M1.4, M1.8, M14, M18 and M22 omitted |
| Hexagon socket set screws with cup point |
916 |
4029 |
|
|
4029 |
2004-05 |
Hexagon socket set screws with cup point |
|
| Hexagon socket set screws with dog point |
915 |
4028 |
|
|
4028 |
2004-05 |
Hexagon socket set screws with dog point |
Nominal sizes M1.4, M1.8, M14, M18 and M22 omitted |
| Hexagon socket set screws with flat point |
913 |
4026 |
|
|
4026 |
2004-05 |
Hexagon socket set screws with flat point |
Nominal sizes M1.4, M1.8, M14, M18 and M22 omitted |
| Hexagon thin nuts with M 1,6 to M 10 threads |
439-1 |
4036 |
24036 |
4036 |
4036 |
2001-02 |
Hexagon thin nuts (unchamfered) – Product grade B |
Correlation of dimensions with DIN 439-1, except for the width across flat of the nut M10 |
| Hexagon thin nuts with M 1,6 to M 52 and M 8×1 to M 52×3 threads |
439-2 |
4035 |
24035 |
|
4035 |
2001-03 |
Hexagon thin nuts (unchamfered) – Product grades A and B |
In tables 1 and 2 abbreviations changed and some specifications (thread dimensions) changed |
| Hexagon thin nuts with M 1,6 to M 52 and M 8×1 to M 52×3 threads |
439-2 |
4035 |
24035 |
4035 |
4035 |
2001-03 |
Hexagon thin nuts (unchamfered) – Product grades A and B |
Standard divided by regular type screw threads and fine threads; width across flats according to ISO 272 changed; nominal size range changed; fine thread see ISO 8675 |
| Hexagon thin nuts with M 1,6 to M 52 and M 8×1 to M 52×3 threads |
439-2 |
8675 |
28675 |
|
8675 |
2001-03 |
Hexagon thin nuts (unchamfered) with metric fine pitch thread – Product grades A and B |
Standard divided by regular type screw threads and fine threads; width across flats according to ISO 272 changed; nominal size range changed; regular type screw thread see ISO 4035 |
| Hexagon washers head drilling screws with tapping screw thread |
7504 |
15480 |
|
|
15480 |
2000-02 |
Hexagon washers head drilling screws with tapping screw thread |
Standard divided into five single standards (EN ISO 10666, 15480, 15481, 15482, 15483); thread ST 3.9 omitted; hexagon head with collar and slot (Form L) omitted |
| High-strength hexagon head bolts with large widths across flats for structural steel bolting |
6914 |
|
14399-4 |
|
7412 |
2006-06 |
High-strength structural bolting assemblies for preloading – Part 4: System HV – Hexagon bolt and nut assemblies |
|
| High-strength hexagon nuts with large widths across flats for structural steel bolting |
6915 |
|
14399-4 |
|
|
2006-06 |
High-strength structural bolting assemblies for preloading – Part 4: System HV – Hexagon bolt and nut assemblies |
|
| M 8×1 to M 100×4 hexagon head bolts with fine pitch thread |
961 |
8676 |
28676 |
8676 |
8676 |
2001-03 |
Hexagon head screws with metric fine pitch thread – Product grades A and B |
Nominal size extended; width across flats according to DIN ISO 272 included |
| Mushroom head square neck bolts |
603 |
|
|
|
8677 |
1981-10 |
|
|
| Plain washers – Extra large series, product grade C |
440 |
7094 |
|
|
7094 |
2000-12 |
Plain washers – Extra large series, product grade C |
Nominal sizes changed, nominal size 24 size "a" redefined to the maximum, square-end hole Form R omitted; (standard DIN 440 still valid) |
| Plain washers for clevis pins; product grade A |
1440 |
|
28738 |
|
8738 |
1992-10 |
Plain washers for clevis pins; product grade A |
Nominal sizes changed |
| Prevailing torque type – All-metal hexagon nuts with flange |
6927 |
|
1664 |
|
7044 |
1998-02 |
Prevailing torque type – All-metal hexagon nuts with flange |
Width across flat M10 changed |
| Prevailing torque type all-metal hexagon nuts |
6925 |
7042 |
27042 |
|
7042 |
1998-02 |
Prevailing torque type (all-metal hexagon nuts), style 2 – Property classes 5, 8, 10 and 12 |
Height of nut changed; width across flat according to ISO 272 included |
| Prevailing torque type all-metal hexagon nuts |
6925 |
10513 |
30513 |
|
10513 |
1998-02 |
Prevailing torque type all-metal hexagon nuts, style 2, with metric fine pitch thread – Property classes 8, 10 and 12 |
Height of nut changed; width across flat according to ISO 272 included |
| Prevailing torque type hexagon nuts with flange (with non-metallic insert), with metric fine pitch thread |
6926 |
|
1666 |
|
12125 |
1998-02 |
Prevailing torque type hexagon nuts with flange (with non-metallic insert), with metric fine pitch thread |
Width across flat M10 changed |
| Prevailing torque type hexagon nuts with non-metallic insert |
982 |
7040 |
27040 |
|
7040 |
1998-02 |
Prevailing torque type hexagon nuts (with non-metallic insert), style 1 – Property classes 5, 8 and 10 |
Height of nut changed; width across flat according to ISO 272 included |
| Prevailing torque type hexagon nuts with non-metallic insert |
982 |
10512 |
30512 |
|
10512 |
1998-02 |
Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread – Property classes 6, 8 and 10 |
Height of nut changed; width across flat according to ISO 272 included |
| Prevailing torque type hexagon nuts with non-metallic insert |
6924 |
7040 |
27040 |
|
7040 |
1998-02 |
Prevailing torque type hexagon nuts (with non-metallic insert), style 1 – Property classes 5, 8 and 10 |
Height of nut changed; width across flat according to ISO 272 included |
| Prevailing torque type hexagon nuts with non-metallic insert |
6924 |
10512 |
30512 |
|
10512 |
1998-02 |
Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread – Property classes 6, 8 and 10 |
Height of nut changed; width across flat according to ISO 272 included |
| Prevailing torque type hexagon thin nuts with non-metallic insert |
985 |
10511 |
|
|
10511 |
1998-02 |
Prevailing torque type hexagon, thin nuts (with non-metallic insert) |
Height of nut changed; width across flat according to ISO 272 included |
| Product grade A washers with a hardness from 300 HV, designed for use with hexagon head bolts and nuts |
125-2 |
7089 |
|
|
7089 |
2000-11 |
Plain washers – Normal series, Product grade A |
Without chamfer, up to nominal diameter 64 |
| Product grade A washers with a hardness from 300 HV, designed for use with hexagon head bolts and nuts |
125-2 |
7090 |
|
|
7090 |
1990-03 |
Plain washers, chamfered – Normal series, Product grade A |
Without chamfer, up to nominal diameter 64 |
| Product grade A washers with a hardness up to 250 HV, designed for use with cheese head screws |
433-1 |
7092 |
|
|
7092 |
2000-11 |
Plain washers – Small series, Product grade A |
Pyramid diamond hardness 140 HV cancelled; rating changed |
| Product grade A washers with a hardness up to 250 HV, designed for use with hexagon head bolts and nuts |
125-1 |
7089 |
|
|
7089 |
2000-11 |
Plain washers – Normal series, Product grade A |
Without chamfer, up to nominal diameter 64 |
| Product grade A washers with a hardness up to 250 HV, designed for use with hexagon head bolts and nuts |
125-1 |
7090 |
|
|
7090 |
1990-03 |
Plain washers, chamfered – Normal series, Product grade A |
Without chamfer, up to nominal diameter 64 |
| Product grade A washers with a hardness up to 300 HV, designed for use with cheese head screws |
433-2 |
7092 |
|
|
7092 |
2000-11 |
Plain washers – Small series, Product grade A |
Nominal sizes changed |
| Product grade C washers, designed for use with hexagon head bolts and nuts |
126 |
7091 |
|
|
7091 |
2000-11 |
Plain washers – Normal series, Product grade C |
Nominal sizes changed |
| Thread rolling screws for ISO metric thread – Part 1: Technical specifications for case hardened and tempered screws |
7500-1 |
7085 |
|
|
|
2009-06 |
Thread rolling screws for ISO-metric thread |
Normative revision, values for case-hardening depth and hole size revised, torque values reduced |
| Washers for high tensile bolting in steel structures |
6916 |
|
14399-6 |
|
7416 |
2006-06 |
High-strength structural bolting assemblies for preloading – Part 6: Plain chamfered washers |
|
| Washers; outside diameter ˜ 3 x bolt diameter |
9021 |
7093-1 |
|
|
7093-1 |
2000-11 |
Plain washers – Large series – Part 1: Product grade A |
Dimensions partially changed |
| Washers; outside diameter approx. 3 x bolt diameter |
9021 |
7093-2 |
|
|
7093-2 |
2000-11 |
Plain washers – Large series – Part 2: Product grade C |
Dimensions partially changed |